X100P.com IAX2 ATA

Discussion in 'VOIP' started by William P.N. Smith, Jun 4, 2006.

  1. Just tried out the $70 http://x100p.com/products_2.htm ATA I (thought
    I) saw reccomended here with my [email protected] 2.8 PBX, and it worked
    flawlessly. A bit of initial difficulty setting it up was due to the
    lack of supplied documentation (a single piece of paper with "Here's a
    hidden pointer to the manual on our WWWebsite"), but getting it up and
    running was almost trivial. Fired it up on my LAN, found it's IP
    (push the button and pick up the phone and it speaks it's IP!),
    pointed my WWWeb browser at it, configured it to work on the LAN, made
    calls back and forth (G.711 and GSM were the only compatable codecs,
    but GSM is perfect for what I want), pointed it at my WAN IP, put it
    outside the firewall, and it made calls flawlessly. Can't wait to try
    it out far from home!

    I think the hardest part was figuring out how to poke a hole in my
    firewall at port 4569. 8*)

    Anyway, just a happy customer, in case anyone else is looking for a
    similar solution.
     
    William P.N. Smith, Jun 4, 2006
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.