WS-C2924-XL-EN switch

Discussion in 'Cisco' started by gene martinez, Feb 9, 2006.

  1. gene martinez

    gene martinez Guest

    This is an old cisco switch, it's running ver 11.2(8.1)SA6. I have it
    configured wuith (4) vlans for my home network. I know that the access
    to the switch is from vlan 1. Can this be changed to a different
    vlan???

    Thanks
     
    gene martinez, Feb 9, 2006
    #1

    1. Advertisements

  2. gene martinez

    Bob Goddard Guest

    # conf t
    (config)# int vlan <1-1001>
    (config-subif)# management


    B
     
    Bob Goddard, Feb 9, 2006
    #2

    1. Advertisements

  3. gene martinez

    Horst Wagner Guest

    Say if you want it to be change to vlan 5 for example:

    conf t
    int vlan 1
    shut
    int vlan 5
    ip addre "vlan-5-ip-address" "vlan5-subnet-mask"
    no shut
    ip default-gateway "vlan-5-default-gateway"
    end
    wr

    That should do the job
    Horst
     
    Horst Wagner, Feb 10, 2006
    #3
  4. gene martinez

    gene martinez Guest

    Thanks

    Seems like this newsgroup was down for a few days with my isp.
     
    gene martinez, Feb 11, 2006
    #4

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. difference b/w layer 2 switch and layer 3 switch

  2. mrtg, snmp and cisco C2924 resets

  3. bridge / layer 2 switch / layer 3 switch

  4. Dead Cicso Catalyst WS-C2924-XL-EN

  5. Is a frame switch and an ISDN switch really needed?

  6. Hang internal network traffic on Cisco Catalyst C2924-XL.

  7. C2924 and Multiple VLANs

  8. Flashing lights on C2924-XL-EN

Loading...