WPA Security Issue

Discussion in 'Wireless Networking' started by Guest, Nov 28, 2005.

  1. Guest

    Guest Guest

    I have a Linksys WRT54G router and I can get wireless to work with WEP but
    not WPA. Any ideas I have the security on the Linksys box set to
    WPA-Personal and am using TKIP. Windows tells me there are no available
    networks althought I have the correct SSID and crediential on the WinXP
    side...
     
    Guest, Nov 28, 2005
    #1
    1. Advertisements

  2. Guest

    Guest Guest

    Do you have the Linksys box giving out IP addresses via DHCP? Make sure you
    are since you'll need an address.

    Also, you can check Linksys's website to see if there are any issues that
    are close to yours or if there are any firmware updates.
     
    Guest, Nov 28, 2005
    #2
    1. Advertisements

  3. Guest

    Ryan Younger Guest

    Have you ever managed to connect using WPA? If not, do you know that your
    wireless adapter supports WPA?

    Are you using 802.11b with your router? (I am guessing this is the case) If
    so, have you tried setting your router to use 802.11g only (if your router
    supports 802.11g) and seeing if WPA then works?

    --
    All the best,

    Ryan Younger.
    http://spaces.msn.com/members/wirelessnetworking/ - Ryan's Wireless
    Networking Weblog

     
    Ryan Younger, Nov 28, 2005
    #3
  4. Per mikek:
    I printed all my WRT54G screens to PDF.

    Flip me an email address if you want to see them. WPA, no prob....
     
    (PeteCresswell), Nov 29, 2005
    #4
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.