WPA DHCP problem leads to PSched UpperBind Question

Discussion in 'Wireless Networks' started by leviculus, Feb 17, 2006.

  1. leviculus

    leviculus Guest

    DHCP would not work reliably from my laptop to a router. The command "netsh
    int ip reset resetlog.txt" seems to fix it by replacing the "PSched" protocol
    in the UpperBind value of the Linkage Registry key for the wireless card with
    the list "NM AegisP MDC8021X Ndisuio RasPppoe Tcpip". It did this for
    several devices including the LAN card.

    If this reset action is correct, what changed all of them to "PSched"?
    Should "PSched" be added to the replacement list?
    Is this list a shotgun approach? Are all these protocols necessary for
    every device?
    What information is available to assist the user?
    leviculus, Feb 17, 2006
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.