WIC-1DSU-T1 and WIC-1DSU-T1-V2

Discussion in 'Cisco' started by dt1649651, Apr 12, 2005.

  1. dt1649651

    dt1649651 Guest

    What is the difference between the two modules WIC-1DSU-T1 and
    WIC-1DSU-T1-V2 ?

    I need to connect two T1 lines for double bandwith and backup if one T1
    fails. Do I have to get the V2 or any of them will do what I need ?

    Thanks,

    DT
     
    dt1649651, Apr 12, 2005
    #1
    1. Advertisements

  2. dt1649651

    BradReeseCom Guest

    BradReeseCom, Apr 12, 2005
    #2
    1. Advertisements

  3. dt1649651

    dt1649651 Guest

    dt1649651, Apr 12, 2005
    #3
  4. dt1649651

    dt1649651 Guest

    dt1649651, Apr 12, 2005
    #4
  5. Also be aware that there are older platforms out there which accept the
    WIC-1DSU-T1 but will not reliably recognize the WIC-1DSU-T1-V2. Examples
    include the 2610 and 2611 routers (not to be confused with the XM models
    with the same numbers). Use care and check the hardware compatability
    list.
     
    Vincent C Jones, Apr 12, 2005
    #5
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.