WCCP on ASA & traffic between physical interfaces on ASA

Discussion in 'Cisco' started by apsolar, Feb 13, 2007.

  1. apsolar

    apsolar Guest

    Hello,

    I am trying to get WCCP working on the ASA for WAAS implementation.
    Here is a simple snapshot of my config:
    Eth 0/0 : Outside (to internet)
    Eth 0/1 : Vlan1 (20.20.0.0/16) (trunk port to remote office LAN)
    Eth 0/1.211 : Vlan211 (20.21.10.0/24)
    Eth 0/1.212 : Vlan212 (20.21.20.0/24)
    Eth 0/1.220 : Vlan220 (20.22.0.0/16)
    Eth 0/2 : WAAS (20.21.30.0/24)


    I have the site to site tunnel working. I can ping the WAAS device
    from the other end of the tunnel but I cannot ping it from the
    20.20.0.0/16 network. I have enabled traffic between interfaces on
    same security level as WAAS and LAN have same security.

    I get this error message:
    3 Feb 12 2007 17:54:05 305006 20.20.10.101 portmap translation
    creation failed for icmp src WAAS:20.21.30.230 dst LAN:20.20.10.101
    (type 8, code 0)

    How can I fix this?

    My second question is regarding WCCP on ASA. Here is the WCCP part of
    the config I have:
    wccp 61 redirect-list WCCP_To_LAN
    wccp 62 redirect-list WCCP_To_WAN
    wccp interface outside 62 redirect in
    wccp interface LAN 61 redirect in
    access-list WCCP_To_LAN extended permit ip any 20.20.0.0 255.252.0.0
    access-list WCCP_To_WAN extended permit ip 20.20.0.0 255.252.0.0 any
    I am not seeing any packets being redirected to the WAE. I once
    changed the access lists to 'any any' and I saw some packets but I
    couldn't ping or telnet to the remote site. Could it be a loop? Is
    there any way to exclude traffic to avoid loop?

    Thanks
    Ankit
     
    apsolar, Feb 13, 2007
    #1
    1. Advertisements

  2. apsolar

    apsolar Guest

    common guys.
    someone here can definitely help me.
     
    apsolar, Feb 14, 2007
    #2
    1. Advertisements

  3. apsolar

    Smokey Guest

    1 800 553 2447
     
    Smokey, Feb 14, 2007
    #3
  4. apsolar

    apsolar Guest

    Tell me something new!!!
     
    apsolar, Feb 15, 2007
    #4
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.