VPN with iphone/ipad

Discussion in 'Linux Networking' started by Georg Horn, Jan 27, 2012.

  1. Georg Horn

    Georg Horn Guest

    Hi,

    i tried to set up a vpn between an ipad and a linux server, following
    this website: http://en.gentoo-wiki.com/wiki/VPN_iPhone_IPSec

    When i try to connect i get the following messages in the syslog:

    Jan 27 17:53:10 vivaldi racoon: [192.168.100.216] INFO: Selected NAT-T version: RFC 3947
    Jan 27 17:53:10 vivaldi racoon: INFO: Adding xauth VID payload.
    Jan 27 17:53:10 vivaldi racoon: [192.168.100.4] INFO: Hashing 192.168.100.4[500] with algo #2
    Jan 27 17:53:10 vivaldi racoon: INFO: NAT-D payload #0 verified
    Jan 27 17:53:10 vivaldi racoon: [192.168.100.216] INFO: Hashing 192.168.100.216[500] with algo #2
    Jan 27 17:53:10 vivaldi racoon: INFO: NAT-D payload #1 verified
    Jan 27 17:53:10 vivaldi racoon: INFO: NAT not detected
    Jan 27 17:53:10 vivaldi racoon: [192.168.100.216] INFO: Hashing 192.168.100.216[500] with algo #2
    Jan 27 17:53:10 vivaldi racoon: [192.168.100.4] INFO: Hashing 192.168.100.4[500] with algo #2
    Jan 27 17:53:10 vivaldi racoon: INFO: Adding remote and local NAT-D payloads.
    Jan 27 17:53:11 vivaldi racoon: WARNING: unable to get certificate CRL(3) at depth:0 SubjectName:...
    Jan 27 17:53:11 vivaldi racoon: WARNING: unable to get certificate CRL(3) at depth:1 SubjectName:...
    Jan 27 17:53:11 vivaldi racoon: INFO: Sending Xauth request
    Jan 27 17:53:11 vivaldi racoon: [192.168.100.216] INFO: received INITIAL-CONTACT
    Jan 27 17:53:11 vivaldi racoon: INFO: ISAKMP-SA established 192.168.100.4[500]-192.168.100.216[500] spi:6aa3af26decd9581:805d7498a9bc9ed7
    Jan 27 17:53:11 vivaldi racoon: ERROR: ignore information because the message is too short - 76 byte(s).

    and the ipad displays a message "cannot verify server certificate" or
    something like that.

    Has anyone ever done this or set up successfully a vpn between ipad and
    linux with another software than ipsec?

    Bye and TIA,
    Georg
     
    Georg Horn, Jan 27, 2012
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.