Vpn tunnel to 3000 concentrator

Discussion in 'Cisco' started by rarnold@seidlercos.com, May 25, 2005.

  1. Guest

    Im tring to setup a cisco 1841 with site to site vpn access to a cisco
    3000 concentrator. not sure what I need to do to get it to work
    properly so far I've created the tunnel and all the crypto information
    on the local router, and configured a site to site connection on the
    concentrator. but for some reason the VPN wont comeup! any ideas or
    have insight.

    thanks
     
    , May 25, 2005
    #1
    1. Advertisements

  2. you need to post your config(s) in order for someone to give you an
    intelligent answer.

    ===========================================
    On 25 May 2005 11:40:10 -0700, wrote:

    >Im tring to setup a cisco 1841 with site to site vpn access to a cisco
    >3000 concentrator. not sure what I need to do to get it to work
    >properly so far I've created the tunnel and all the crypto information
    >on the local router, and configured a site to site connection on the
    >concentrator. but for some reason the VPN wont comeup! any ideas or
    >have insight.
    >
    >thanks
     
    X--Eliminator, May 26, 2005
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.