VPN(PPTP) with MN-700

Discussion in 'Broadband Hardware' started by gwu, Sep 8, 2006.

  1. gwu

    gwu Guest

    I am able to successfully VPN (PPTP) to my corporate network, however, my VPN
    connection is disconnected after about 40 seconds (this is very consistently
    dropped at 35-45 seconds). Everything else works great -- I can still have
    Internet connectivity, etc.

    If I remove the router (MN-700) from the system and connect my MacBook Pro
    directly to the DSL modem, I don't have this problem, so I'm sure it has
    something to do with the router. Does the MN-700 expect some sort of
    Windows-only signal from the client computer to tell it to keep VPN
    connections alive?

    Any other ideas?
     
    gwu, Sep 8, 2006
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. VPN with Microsoft MN-700 Router

  2. Can I use PPTP-based VPN with Cisco PIX and RSA Securid?

  3. PIX 506e (6.3 (1)) PPTP VPN with all Invalid IP's

  4. PPTP with MPPE & RIP not working between Cisco4500 & WinXP native VPN

  5. PIX 501: Access an IPSEC VPN through a PPTP VPN - is this possible?

  6. mixing pix-to-pix vpn and pptp-dial-in-vpn on pix501

  7. Cisco PPTP VPN - default gateway (sharing local and VPN resources)

  8. Absurd PPTP problems: PPTP out no longer works.

Loading...