VPN Client 3.6.3(Rel) "The user authentication application failed to start"

Discussion in 'Cisco' started by boz, Mar 2, 2004.

  1. boz

    boz Guest

    If this is not the right forum to post this question, please accept my
    apologies in advance.

    I have a situation where a W2ksp4 machine will sporadically (every 1
    to 5 weeks) reach a point where it's VPNCLIENT will no longer connect
    - I fail w/
    errorlevel 14 , "The user authentication application failed to start."
    The
    only methodology I have found yet to restore the system to operation
    is to
    uninstall / reinstall the VPN Client software repeatedly.

    Any and all advice /suggestions / pointers welcome.

    Thanks!
     
    boz, Mar 2, 2004
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Help with Cisco VPN client 4.0.1 (and 4.0.3) - The VPN client could not find the adapters GUID

  2. Cisco VPN Client 4.01 (Rel) problems connecting to Cisc o 2612 IOS Router.

  3. Cisco VPN Client 4.04 Rel to a PIX 506E connects, but no traffic

  4. PIX 501 VPN client to VPN client connections

  5. site to site VPN on DMZ and outside pix/asa rel 7.x

  6. Cisco VPN client OK - Checkpoint VPN client not OK

  7. VPN site to site & Remote access VPN ( vpn client) over the same interface

Loading...