VPN between Static & Dynamic addressed ASA

Discussion in 'Cisco' started by ahs, Jul 19, 2009.

  1. ahs

    ahs

    Joined:
    Jul 19, 2009
    Messages:
    2
    Likes Received:
    0
    Hi

    I am trying to create a VPN between a static addressed ASA and a dynamic address ASA, both runnign (ASA Version 8.0(4)) . But unable to have any success. Has any body done that before. OR if any body can point me in the correct direction.

    regards
    ash
     
    ahs, Jul 19, 2009
    #1

    1. Advertisements

  2. ahs

    ahs

    Joined:
    Jul 19, 2009
    Messages:
    2
    Likes Received:
    0
    RESOLVED - ASA-ASA VPN: One Static & One Dynamic address

    I managed to resolve this , Go Here

    ashcisasa[dot]blogspot.com

    Please replace the [dot] with a '.' and it is http
     
    ahs, Jul 19, 2009
    #2

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Building VPN's: Static/Dynamic//IOS/PIX/Cisco VPN Client/ all at the same time

  2. Does Pix or cisco router support dynamic-to-dynamic IPSec VPN?

  3. VPN between 2 Cisco routers (1 static, 1 dynamic) with access from stat --> dynamic over ISDN

  4. VPN between Cisco 837 (static IP) and Soho 97 (dynamic IP)

  5. ASA 5505 VPN making crazy. How to build single VPN on ATT dynIP/static IP pool system

  6. question regarding creating a site-to-site VPN between an ASA 5505and a VPN 3030

  7. VPN between peers with dynamic IP address and dynamic DNS

  8. PIX 8.x to ASA 8.x Site (static ip) to Site (dynamic ip) tunnelconfiguration

Loading...