VoIP wired router behind a wireless router and AP

Discussion in 'Wireless Networking' started by Hachijo, Sep 19, 2004.

  1. Hachijo

    Hachijo Guest

    I recently set up a wireless network connecting to an FTTH cable modem I had
    installed at a friend's home 4 km away. The FTTH modem connects to a
    802.11b/g wireless Buffalo router. The router connects to my home network
    via 2 antennae, a Buffalo access point, and hub. I'm getting about 2mb
    throughput to the internet from home. For my little knowledge of wireless
    networking, it seems to be working alright. When I signed up for the FTTH
    service, I also signed on for the IP phone service being offered. The FTTH
    provider sent an rental NEC VoIP-enabled wired router (I live in Japan) and
    the usual setup instructions explaining that the VoIP router is to be
    plugged directly into the FTTH modem, which is 4 km away (my home phone and
    phone line, of course, are supposed to plug into the VoIP router). Instead,
    I'd like to try to set up the IP phone with the VoIP router placed at home,
    behind and connected to the access point. Is this possible? Can someone
    perhaps give me some general instructions for setting it up?

    Any information would be appreciated.
    Hachijo, Sep 19, 2004
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.