voip - splitting ISDN channel

Discussion in 'Cisco' started by Bangla Deszcz, Jul 13, 2003.

  1. Hi All!

    have you got any idea how to split one ISDN PRI channel into two
    separate channels, i.e. the first having 1-20 timeslots and second one
    - 21-30 timeslots ?
    Or maybe there is some other way to create two dial-peers, each of
    them controling only a part of this ISDN channel (PRI). I need to
    ensure 20 lines for +1234* direction and 10 lines for +1987*
    direction...

    Normally, I would create dial-peer with "port 0:D" config. But then
    there would be all 30 lines controled by this dial-peer :( I need to
    set only 20 there and other 10 in second dial-peer.

    Thanks &rgrds
    Bangla
     
    Bangla Deszcz, Jul 13, 2003
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.