VLAN1 tagged on trunk?

Discussion in 'Cisco' started by Steffen M. Steck, Feb 13, 2006.

  1. Hi everybody,
    I have a port channel on a C4509 configured as trunk:
    interface Port-channel5
    switchport
    switchport trunk encapsulation dot1q
    switchport mode trunk
    !
    All vlans work correct on the other side of the channel besides vlan 1.
    The other side is a vmware ESX machine with a virtual switch inside,
    which seems to need vlan 1 tagged over the trunk. Can someone give me a
    hint how to config this?
    Thx
    Steffen
     
    Steffen M. Steck, Feb 13, 2006
    #1
    1. Advertisements

  2. vlan dot1q tag native
     
    Tomasz Paszkowski, Feb 13, 2006
    #2
    1. Advertisements

  3. Steffen M. Steck

    Scott Lowe Guest

    I ran into this very issue myself not more than a couple of days ago.
    Can you elaborate (or anyone, for that matter) on the implications of
    tagging VLAN 1 traffic using this command? Does that mean that all
    untagged traffic is dropped?

    TIA.
     
    Scott Lowe, Apr 20, 2006
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.