Using an Avaya 4610SW IP phone with Cisco CME 3.3

Discussion in 'Cisco' started by ttripp, Nov 20, 2008.

  1. ttripp

    ttripp Guest

    I have a Cisco CME 3.3 test lab set up, and have several 7940 and 7960
    IP phones attached (2691 router w/ 3550 PoE switch).

    I also have an Avaya 4610SW IP phone that I'd like to add to the
    system. From what I've read, this should be possible. My question
    is, how?

    I'm thinking the phone has to know which vlan is the voice vlan so it
    can pick up the correct IP address from DHCP, then it has to be
    registered with CME. Does anyone have any step-by-step directions I
    could follow? Thanks.
     
    ttripp, Nov 20, 2008
    #1

    1. Advertisements

  2. ttripp

    Bob Guest

    Visit avayausers.com
     
    Bob, Nov 20, 2008
    #2

    1. Advertisements

  3. ttripp

    ttripp Guest

    Thanks, looks like lots of good info.
     
    ttripp, Nov 20, 2008
    #3

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. New Cisco CallManager Express (CME) Resource Site

  2. Cisco IP Phone H.323 with Avaya IP Office

  3. Avaya Soft Phone on Linux

  4. Cisco Unity Express and Cisco CME GUI - separate admin accounts?

  5. Cisco 2851 CME Echo Cancellation

  6. Help with CME in a high latency (SATCOM) environment

  7. nok E71 with SIP on CME ?

  8. Regarding AVAYA IP Phone 1608 & Cisco DHCP

Loading...