Upgrading Firewall Version and PDM on PIX 506E (newbie user)

Discussion in 'Cisco' started by jaisol, May 5, 2005.

  1. jaisol

    jaisol Guest

    This is its show version:

    Cisco PIX Firewall Version 6.1(2)
    Cisco PIX Device Manager Version 1.1(2)

    Compiled on Fri 16-Nov-01 14:28 by morlee

    Hardware: PIX-506E, 32 MB RAM, CPU Pentium II 299 MHz
    Flash E28F640J3 @ 0x300, 8MB
    BIOS Flash AM29F400B @ 0xfffd8000, 32KB

    0: ethernet0: address is 0009.b718.b578, irq 10
    1: ethernet1: address is 0009.b718.b579, irq 11

    Licensed Features:
    Failover: Disabled
    VPN-DES: Enabled
    VPN-3DES: Disabled
    Maximum Interfaces: 2
    Cut-through Proxy: Enabled
    Guards: Enabled
    Websense: Enabled
    Inside Hosts: Unlimited
    Throughput: Unlimited
    ISAKMP peers: Unlimited

    I would like to upgrade to Firewall Version 6.3(4) and PDM 3.0(2) but I
    don't know if this PIX needs some else requeriment.
    I have .bin files but I don't know if these are what I need or need
    more. They are pdm-302.bin and pix634.bin.

    I have instructions to upgrade PDM but I don't know how to upgrade
    firewall version.

    Any response will be appreciated.

    THANKS!
     
    jaisol, May 5, 2005
    #1
    1. Advertisements

  2. :Cisco PIX Firewall Version 6.1(2)
    :Cisco PIX Device Manager Version 1.1(2)

    :Hardware: PIX-506E, 32 MB RAM, CPU Pentium II 299 MHz
    :I would like to upgrade to Firewall Version 6.3(4) and PDM 3.0(2) but I
    :don't know if this PIX needs some else requeriment.

    No, your 506E should be able to handle 6.3(4) without difficulty.

    :I have .bin files but I don't know if these are what I need or need
    :more. They are pdm-302.bin and pix634.bin.

    Those are what you need.


    :I have instructions to upgrade PDM but I don't know how to upgrade
    :firewall version.

    http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_61/cmd_ref/c.htm#1026589
     
    Walter Roberson, May 5, 2005
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.