UK Busy tone on an SPA-3000?

Discussion in 'UK VOIP' started by Ian Pawson, Dec 21, 2006.

  1. Ian Pawson

    Ian Pawson Guest

    I have been trying to set my ATA to give the UK style busy tone. The
    best I can manage is [email protected],[email protected];10(.3/.6/1+2) but this is still not
    correct. Any advice on the correct setting please?

    Cheers, Ian
     
    Ian Pawson, Dec 21, 2006
    #1
    1. Advertisements

  2. Thus spaketh Ian Pawson:

    [email protected];30(.375/.375/1)
     
    {{{{{Welcome}}}}}, Dec 21, 2006
    #2
    1. Advertisements

  3. Ian Pawson

    Ivor Jones Guest

    "{{{{{Welcome}}}}}" <[email protected]___hotmail.co.uk>
    wrote in message
    Thanks here also. Do you have a link or file with the full range of UK
    settings..? Mine is a SPA-2000 if there are any differences.


    Ivor
     
    Ivor Jones, Dec 21, 2006
    #3
  4. Thus spaketh Ivor Jones:
    Dial Tone: [email protected],[email protected];60(*/0/1+2)
    Second Dial Tone: [email protected],[email protected];10(*/0/1+2)
    Outside Dial Tone: [email protected];10(*/0/1)
    Prompt Tone: [email protected],[email protected];10(*/0/1+2)
    Busy Tone: [email protected];30(.375/.375/1)
    Reorder Tone: [email protected];20(*/0/1)
    Off Hook Warning Tone: [email protected],[email protected];10(.125/.125/1+2)
    Ring Back Tone: [email protected],[email protected];*(.4/.2/1+2,.4/2/1+2)
    Confirm Tone: [email protected];1(.25/.25/1)
    SIT1 Tone:
    [email protected],[email protected],[email protected];20(.330/0/1,.330/0/2,.330/0/3,0/1/0)
    SIT2 Tone:
    [email protected],[email protected],[email protected];20(.274/0/1,.274/0/2,.380/0/3,0/4/0)
    SIT3 Tone:
    [email protected],[email protected],[email protected];20(.380/0/1,.380/0/2,.380/0/3,0/4/0)
    SIT4 Tone:
    [email protected],[email protected],[email protected];20(.380/0/1,.274/0/2,.380/0/3,0/4/0)
    MWI Dial Tone: [email protected],[email protected];10(.75/.75/1+2)
    Cfwd Dial Tone: [email protected],[email protected];2(.2/.2/1+2);10(*/0/1+2)
    DND Dial Tone: [email protected],[email protected];2(.2/.2/2);10(*/0/1+2)
    Holding Tone: [email protected];*(.1/.1/1,.1/.1/1,.1/9.5/1)
    Conference Tone: [email protected];20(.1/.1/1,.1/9.7/1)
    Secure Call Indication Tone: [email protected],[email protected];15(0/2/0,.2/.1/1,.1/2.1/2)
    Feature Invocation Tone: [email protected];*(.1/.1/1)

    Ring 1 Cadence: 60(.4/.2,.4/2)
    Ring 2 Cadence (BT Call Sign): 60(1/2)
    Ring 3 Cadence (BT Ring Back): 60(.25/.25,.25/.25,.25/1.75)
    Ring 4 Cadence: 60(.4/.8)
    Ring 5 Cadence: 60(2/4)
    Ring6 Cadence: 60(.2/.4,.2/.4,.2/4)
    Ring7 Cadence: 60(.4/.2,.4/.2,.4/4)
    Ring8 Cadence: 60(0.3/9.7)


    The last few Ring Cadence settings are just ones I was testing.


    CWT1 Cadence: 51(.1/5)
    CWT2 Cadence: 30(.25/.25,.25/.25,.25/5)
    CWT3 Cadence: 30(.1/.1, .3/.1, .1/9.3)
    CWT4 Cadence: 30(.1/.1,.1/.1,.1/9.5)
    CWT5 Cadence: 30(.3/.1,.1/.1,.3/9.1)
    CWT6 Cadence: 30(.1/.1,.3/.2,.3/9.1)
    CWT7 Cadence: 30(.3/.1,.3/.1,.1/9.1)
    CWT8 Cadence: 2.3(.3/2)

    (CWT, these are personal settings, I only use the first one).


    Ring Waveform: Sinusoid
    Ring Frequency: 25
    Ring Voltage: 70
    CWT Frequency: [email protected] (A setting I felt comfortable
    with).
    Synchronized Ring: YES

    Hook Flash Timer Min: .06
    Hook Flash Timer Max: .2
    Callee On Hook Delay: 0
    Reorder Delay: 5
    Call Back Expires: 1800
    Call Back Retry Intvl: 30
    Call Back Delay: .5
    VMWI Refresh Intvl: 0
    Interdigit Long Timer: 10
    Interdigit Short Timer: 3
    CPC Delay: .5
    CPC Duration: .1

    FXS Port Impedance: 370+620||310nF
    Daylight Saving Time Rule:
    start=3/-1/7/2:0:0;end=10/-1/7/2:0:0;save=1:0:0
    FXS Port Input Gain: 0
    FXS Port output Gain: 0
    DTMF Playback Level: -16
    DTMF Playback Length: .25
    Caller ID Method: ETSI FSK With PR(UK)
    Caller ID FSK Standard: V.23
    FXS Port Power Limit: 3
    Feature Invocation Method: Default
    More Echo Suppression: YES


    I remember getting some of the details from:
    http://forum.voxilla.com/linksys-si...british-ring-pattern-help-required-13936.html
    and
    http://www.sipgate.co.uk/faq/index.php?aktion=anzeigen&type=devices&rubrik=630

    Though some I may have modified, such as extending the busy tone to
    sound for 30 seconds and extending the dial tone to sound for 60 seconds
    before giving the off-hook warning.

    These are taken from my PAP2, but I believe the settings are the same
    for the SPA devices.
     
    {{{{{Welcome}}}}}, Dec 21, 2006
    #4
  5. Ian Pawson

    Ian Pawson Guest

    Many thanks for the info
     
    Ian Pawson, Dec 22, 2006
    #5
  6. They're still at http://www.phones.sanguinarius.co.uk (afaik they're
    correct, mind you it was a long time ago that I put the pages up).
     
    Thomas Kenyon, Dec 22, 2006
    #6
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.