Two Lines with a Fritzbox 1020

Discussion in 'UK VOIP' started by bobgarb, Feb 20, 2009.

  1. bobgarb

    bobgarb Guest

    Hi, In a Previous post I mentioned that I Could not get both voip
    lines to work at the same time, someone mentioned I had to allow for
    more Bandwidth on the DSL modem biult into this device, I don't use
    DSL but cable! Anyway I found the cure from the problem you use the
    traffic shaping option and allow more bandwidth, I use about 3 megs
    download and 300 kbs upload.

    Cheers, Bob
     
    bobgarb, Feb 20, 2009
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. How to configure two routers with two ISPs and PIX 515 with failover with BGP?

  2. Configuring two T1 lines in cisco 2600 (Total 4 Mbps) from two diffferent providers

  3. Modems, Analog Lines and ... Electrical Lines?

  4. PAP2 Two lines with one phone?

  5. Fritzbox 1020 fone ata

  6. fritzbox 1020

  7. Two telephones on a Fritzbox 1020

Loading...