Trying to connect inside network and DMZ to the same server?

Discussion in 'Windows Networking' started by Mike, Jan 30, 2012.

  1. Mike

    Mike Guest


    I have a Dell box that has a four port NIC card. I have one port connected
    to my internal switch and that's working fine. Now I'm trying to connect
    a second port of the four-port NIC card to my DMZ. I'm running Hyper-V
    on this box and so far that's worked fine. All my guests/VMs connect to
    the internal network just fine. I've gone through the Virtual Network
    Manager and assigned a new guest/VM to connect to the DMZ. It doesn't. I
    have an IP address assigned to the guest in the DMZ. I have an IP address
    assigned to the Hyper-V server for it's connection in the DMZ. In the
    status for this network connection I see incrementing packets sent,
    but none received.

    What is preventing the connection to the DMZ?


    Microsoft Server 2008 R2
    Mike, Jan 30, 2012
    1. Advertisements

  2. Mike

    Mike Guest

    Turns out something either in Hyper-V or on the box decided the next
    port, port 3, is not the port I think it is. I moved the DMZ network
    cable around and found a port that is working.

    This is fixed.

    Mike, Feb 1, 2012
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.