Trying to access the PDM of a Cisco pix over a Remote Access VPN withCisco VPN Client

Discussion in 'Cisco' started by BF, Sep 7, 2008.

  1. BF

    BF Guest

    I am trying to configure the cisco pix (501) to allow access to the
    PDM over a Cisco VPN Client IPSEC tunnel.

    I found a situation for accessing the PDM ove a site-site tunnel but
    am not able to configure it for remote access VPN

    http://www.cisco.com/en/US/products...s_configuration_example09186a0080094497.shtml

    I setup VPN by the wizard and enable split tunnel and excempt complete
    LAN from nat, so not the outside interface ip.

    Tried with management-access none, inside and outside
     
    BF, Sep 7, 2008
    #1

    1. Advertisements

  2. BF

    BF Guest

    I am running
    Cisco PIX Firewall Version 6.3(5)
    Cisco PIX Device Manager Version 3.0(4)

    Cisco VPN Client 5.0.0.3
     
    BF, Sep 7, 2008
    #2

    1. Advertisements

  3. BF

    BF Guest

    I am running
    Cisco PIX Firewall Version 6.3(5)
    Cisco PIX Device Manager Version 3.0(4)

    Cisco VPN Client 5.0.0.3
     
    BF, Sep 7, 2008
    #3

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Help with Cisco VPN client 4.0.1 (and 4.0.3) - The VPN client could not find the adapters GUID

  2. Remote access fun with Cisco 837 and locally auth'd Cisco VPN client

  3. Access to PIX PDM over vpn to inside interface

  4. Cisco 506e - remote-access vpn, split tunnel, client has no internet access.

  5. VPN site to site & Remote access VPN ( vpn client) over the same interface

  6. VOIP over VPN over TCP over WAP over 3G

  7. PIX 515E remote access vpn with DHCP pushed to the client

  8. Issue with cisco vpn client in accessing remote vpn access

Loading...