Trunk beteen Panasonic IP-PBX Panasonic

Discussion in 'Cisco' started by Cisco.ahmed, Jun 23, 2009.

  1. Cisco.ahmed

    Cisco.ahmed Guest

    hey all , I have problem in configuring a trunk between the CUME 2811
    ISR and IP-PBX panasonic I can reach the cisco extension from
    panasonic extensions but I cant do reverse other words I can not
    reach panasonic extensions from cisco extensions

    I configured voip dial-peer with h.323 signalling but still no
    success

    any help will be appreciated Thanks

    xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
     
    Cisco.ahmed, Jun 23, 2009
    #1
    1. Advertisements

  2. Cisco.ahmed

    Thrill5 Guest

    Turning debugging on the call-setup information on the Cisco side and/or
    Panasonic side will point you in the right direction.
     
    Thrill5, Jun 24, 2009
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.