Trouble with second burner installation

Discussion in 'General Computer Support' started by purplemickey, Mar 29, 2009.

  1. purplemickey

    purplemickey

    Joined:
    Mar 29, 2009
    Messages:
    1
    Likes Received:
    0
    My PC had 1xDVD burner and 1 DVD rom, I decided to upgrade the DVD rom with a newer DVD burner but have encountered a problem.

    When I installed all I did was just swap cables from old DVD rom to new DVD burner, then when I rebooted system none of the DVD drives were detected.

    I then unplugged the original burner (that I did not remove) and plugged cables into the new burner and the new burner installed fine however how do I fix this so I can have both working? All I did was unplug old DVD rom and plug new burner in exactly the same as it was set up so should've been quite simple.

    Thanks
     
    purplemickey, Mar 29, 2009
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.