Traffic-shaping traffic with precedence 2

Discussion in 'Cisco' started by tpdasilva, Jun 12, 2008.

  1. tpdasilva

    tpdasilva Guest


    I have a link and traffic from USA enters the network via this link
    (together with traffic from Europe). Traffic from USA is marked with
    precedence 2. I want to throttle certain IP ranges to only use a
    certain amount of traffic that comes in with precedence 2, but am
    encountering problems.

    This is the config I have so far

    class-map match-all precedence2
    match ip precedence 2
    class-map match-all client-128-int
    match ip precedence 2
    match access-group 110

    policy-map international
    class precedence2
    set ip precedence 2
    class client-128-int
    shape average 128000
    class class-default
    set ip precedence 0

    on interface s0/2 I try to activate it as follows
    service-policy input international.

    The policy does not seem to activate, when I issue sh run and look at
    the configs of int s0/2 I dont see the service policy. When I remove
    "class-map match-all client-128-int
    match ip precedence 2" from the service policy and re-apply to int
    s0/2 I can see it in the config and sh policy-map int s0/2 also
    returns results.

    Am I doing something wrong?

    Thanx in advance
    tpdasilva, Jun 12, 2008
    1. Advertisements

  2. tpdasilva


    Oct 4, 2011
    Likes Received:
    Tony you owe me 4700 where's the money I gave u six months and you Try to cut my calls Im going to try being nice one more tym then it's going straight to the cops
    Ios2012, Oct 4, 2011
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.