Tracking VPNs via SNMP on ASA5510 MRTG

Discussion in 'Cisco' started by Jason Parker, Aug 16, 2007.

  1. Jason Parker

    Jason Parker Guest

    Hello,

    I am currently using MRTG to graph the interfaces on my ASA5510. I would
    also like to graph my VPN sessions using MRTG. Is anybody doing this
    or could anyone offer advice on this? I realize that MRTG is off topic a
    bit but I would appreciate any advice on this.

    Here are the snmp commands I have enabled on my ASA:

    snmp-server host outside 1.2.3.4 community fake
    no snmp-server location
    no snmp-server contact
    snmp-server community fake
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    snmp-server enable traps remote-access session-threshold-exceeded

    Jason
     
    Jason Parker, Aug 16, 2007
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.