tracert router missing ?

Discussion in 'Cisco' started by Barrett Bonden, Apr 28, 2005.

  1. A little testbed lan at home with a 1600 and a 2500 ; I see that when I do a
    dos tracert from a PC who's gateway points to the 1600 (going accross to a
    E0 on the 2500) all I see reported are the ethernet address , and not the
    IP's of the routers - is that normal ?
     
    Barrett Bonden, Apr 28, 2005
    #1
    1. Advertisements

  2. :A little testbed lan at home with a 1600 and a 2500 ; I see that when I do a
    :dos tracert from a PC who's gateway points to the 1600 (going accross to a
    :E0 on the 2500) all I see reported are the ethernet address , and not the
    :IP's of the routers - is that normal ?

    It is if you are using "ip unnumbered", or if the devices
    are configured to not generate ttl-exceeded messages.
     
    Walter Roberson, Apr 28, 2005
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.