switchport multi??

Discussion in 'Cisco' started by jbissot, Oct 4, 2007.

  1. jbissot

    jbissot

    Joined:
    Oct 4, 2007
    Messages:
    1
    Likes Received:
    0
    I have a Cisco 2800 router and 5 Cisco 3650 switches.

    The network is divided into 9 vlans. A Microsoft ISA 2006 proxy was installed with the inside interface connected to vlan 120 and the outside interface connected to vlan 110. I have been asked to have the proxy server service some additional vlans.

    On an older switch I would have used the switchport multi to add the additional vlans to the port used by the proxy server. What is the best way to accomplish the same thing with Cisco's newer hardware?
     
    jbissot, Oct 4, 2007
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. TX only switchport on Catalyst 2950

  2. Multi-vrf to Multi-vrf

  3. Using multi-media from multi-source

  4. Multi region / multi format players

  5. Using switchport mode access vlan x and switchport mode trunk on the same interface

  6. Using switchport mode access vlan x and switchport mode trunk on the same interface

  7. Switchport multi and trunk lines

  8. Multi VPN / Multi Users

Loading...