Sup2 question and IOS on Sup1A

Discussion in 'Cisco' started by essenz, Sep 20, 2007.

  1. essenz

    essenz Guest

    I am in the market for a 6506 with Sup2 engine. I have noticed two
    differenet part numbers/models:

    WS-X6K-S2U-MSFC2
    WS-X6K-S2-MSFC2

    Does anyone know the diff between Sup2 and Sup2U?

    I was also looking at Sup1A. The unit probably wont push more then
    200-300Mbit, so I figure a Sup1A might be okay. But a vendor warned me
    that it wouldn't be wise to run the latest 12.2 IOS on a Sup1A, is
    there any basis to that?

    -john
     
    essenz, Sep 20, 2007
    #1
    1. Advertisements

  2. essenz

    Merv Guest


    from Cisco site:

    WS-X6K-S2-MSFC2 Cisco Catalyst 6500 Supervisor Engine 2, 2GE, plus
    MSFC-2/PFC-2

    WS-X6K-S2U-MSFC2 Cisco Catalyst 6500 Supervisor Engine2, 2GE, plus
    MSFC-2/PFC-2 with 512MB for MSFC-2
     
    Merv, Sep 20, 2007
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.