Suddenly will not connect to one of my networks

Discussion in 'Wireless Networking' started by Arthur L-r, Apr 28, 2009.

  1. Arthur L-r

    Arthur L-r Guest

    Hi there,

    XP SP3 IE7 7.0.5730.13
    I run wireless networks in three places, and in one of them, where
    previously I was able to connect, I am no longer able to do so.
    - it connects - says 'connected to ...' but I cannot get onto email or web.
    - new connections (on other machines) that I set up work no problem
    - at the other 2 locations i have no issues
    - other users that have also been able to get on for some time are also
    recently unable to do so
    - have done Repair, etc., has no effect.

    Any ideas?

    Thanks,

    Arthur
     
    Arthur L-r, Apr 28, 2009
    #1
    1. Advertisements

  2. Can you ping the gateway? Can you ping a public IP address? Posting the
    result of ipconfig /all here may help.

    --
    Bob Lin, MS-MVP, MCSE & CNE
    Networking, Internet, Routing, VPN Troubleshooting on
    http://www.ChicagoTech.net
    How to Setup Windows, Network, VPN & Remote Access on
    http://www.HowToNetworking.com
     
    Bob Lin \(MS-MVP\), Apr 28, 2009
    #2
    1. Advertisements

  3. Arthur L-r

    Jack-MVP Guest

    You did not indicated what type of network it is and how the log on goes.
    Might be that some changes occurred in the Network.
    Jack (MS, MVP-Networking)
     
    Jack-MVP, Apr 29, 2009
    #3
  4. Arthur L-r

    Arthur L-r Guest

    Hi Bob,

    Obviously I am conencting through the cable at the moment.

    I cannot PING when only on wireless.

    Arthur
    ============================================


    Windows IP Configuration



    Host Name . . . . . . . . . . . . : ACER-Laptop

    Primary Dns Suffix . . . . . . . :

    Node Type . . . . . . . . . . . . : Unknown

    IP Routing Enabled. . . . . . . . : No

    WINS Proxy Enabled. . . . . . . . : No



    Ethernet adapter Local Area Connection:



    Connection-specific DNS Suffix . :

    Description . . . . . . . . . . . : Marvell Yukon 88E8038 PCI-E Fast
    Ethernet Controller

    Physical Address. . . . . . . . . : 00-16-36-7A-8D-6E

    Dhcp Enabled. . . . . . . . . . . : Yes

    Autoconfiguration Enabled . . . . : Yes

    IP Address. . . . . . . . . . . . : 192.168.10.108

    Subnet Mask . . . . . . . . . . . : 255.255.255.0

    Default Gateway . . . . . . . . . : 192.168.10.200

    DHCP Server . . . . . . . . . . . : 192.168.10.200

    DNS Servers . . . . . . . . . . . : 168.210.2.2

    196.14.239.2

    Lease Obtained. . . . . . . . . . : 29 April 2009 13:45:53

    Lease Expires . . . . . . . . . . : 29 April 2009 14:45:53



    Ethernet adapter Wireless Network Connection:



    Connection-specific DNS Suffix . :

    Description . . . . . . . . . . . : Atheros AR5005G Wireless Network
    Adapter

    Physical Address. . . . . . . . . : 00-16-CF-4D-7E-AA

    Dhcp Enabled. . . . . . . . . . . : Yes

    Autoconfiguration Enabled . . . . : Yes

    IP Address. . . . . . . . . . . . : 192.168.10.109

    Subnet Mask . . . . . . . . . . . : 255.255.255.0

    Default Gateway . . . . . . . . . : 192.168.10.200

    DHCP Server . . . . . . . . . . . : 192.168.10.200

    Lease Obtained. . . . . . . . . . : 29 April 2009 13:46:19

    Lease Expires . . . . . . . . . . : 29 April 2009 14:46:19
     
    Arthur L-r, Apr 29, 2009
    #4
  5. Disconnect the wired first and reboot the computer safe mode with network.
    Can you ping the gateway now?

    How to Run Windows safe Mode with Networking3. Choose the Safe Mode with
    Networking, and press Enter. 4. Confirm whether the problem also happened in
    Safe Mode. Post your questions, comments, ...
    www.howtonetworking.com/Windows/runsafemode.htm


    --
    Bob Lin, MS-MVP, MCSE & CNE
    Networking, Internet, Routing, VPN Troubleshooting on
    http://www.ChicagoTech.net
    How to Setup Windows, Network, VPN & Remote Access on
    http://www.HowToNetworking.com


     
    Bob Lin \(MS-MVP\), Apr 29, 2009
    #5
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.