Subnetting problem?

Discussion in 'Cisco' started by Jorge Paredes, Aug 13, 2004.

  1. Hi all:

    I have a router with this routing and interface configuration :

    interface ethernet 0
    ip address
    interface ethernet 1
    ip address
    interface ethernet 5
    ip address
    ip route
    ip route

    The problem: When I trie to do a ping from a server in interface "ethernet
    0" (f.e.) with IP address using the IP default gateway to IP address (f.e.) the result is:

    If I configure a host route "ip route" all works fine, the ping result is "!!!!!!!!!!!!!!".

    What is happen?

    Jorge Paredes, Aug 13, 2004
    1. Advertisements

  2. Jorge Paredes

    PES Guest

    Do a show ip route and look for two equal routes to Also,
    make sure there are no policy routes (route-maps) on e0.
    PES, Aug 13, 2004
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.