Static MAC table - Cisco 4006

Discussion in 'Cisco' started by Nick Brandson, Apr 20, 2004.

  1. Dear guru,

    We are having trouble with adding static mac-address to more than one
    physical port on the switch,

    here's the syntax

    mac-address-table static {multicast_mac} vlan {id} interface
    {mod/ports} disable-snooping protocol ip

    Our Cisco Switch is using IOS image not a CatOS image, the version of
    IOS is 12.1(12c)EW2, L3 Switch

    the switch suggest to use this one instead...

    ip igmp snooping vlan {id} static {multicast_mac} interface {ports}

    ....

    Any ideas?
    thank
    Nick
     
    Nick Brandson, Apr 20, 2004
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.