Standard PoE on Catalyst 3500 XL series (with inline power)

Discussion in 'Cisco' started by Neddy, Jul 9, 2009.

  1. Neddy

    Neddy Guest

    Ok, so i have a few 24 Port catalyst 3500 XL series with Inline
    Power... Does anyone know how to enable normal PoE on the device, so i
    can use it with non-cisco hardware.. i don't require the inline
    features for PoE for the hardware i am trying to power up...

    Cheers in advance,
    Dave N.
     
    Neddy, Jul 9, 2009
    #1
    1. Advertisements

  2. Neddy

    Brian V Guest

    conf t
    int f0/X
    inline power always
     
    Brian V, Jul 9, 2009
    #2
    1. Advertisements

  3. Neddy

    Neddy Guest

    Ok, i do not have any 'always' option for inline power...
    I have the following:

    Office-Testing-3500(config-i)#power inline ?
    auto Automatically detect and power inline devices
    never Never apply inline power


    Is there any other way to always enable PoE on a specific port on the
    catalyst 3500?

    Cheers,
     
    Neddy, Jul 9, 2009
    #3
  4. Neddy

    Thrill5 Guest

    This switch only supports the Cisco proprietary PoE standard, not the IEEE
    802.11af PoE standard.
     
    Thrill5, Jul 9, 2009
    #4
  5. Neddy

    Neddy Guest

    So only cisco IP phones & ap's will work from it?
     
    Neddy, Jul 9, 2009
    #5
  6. Neddy

    waltjones40

    Joined:
    May 27, 2011
    Messages:
    1
    Likes Received:
    0
    waltjones40, May 27, 2011
    #6
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.