site to site VPN on DMZ and outside pix/asa rel 7.x

Discussion in 'Cisco' started by [email protected], Aug 16, 2007.

  1. ivan@netvision

    [email protected]

    Joined:
    Aug 16, 2007
    Messages:
    2
    Likes Received:
    0
    I have the following problem. We currenly have an cisco pix515E 6.3 on which we have multiple site to site VPN on both the outside an the DMZ interface.

    i'm trying to get the same configuration to work on an asa but some how I can not setup an site to site VPN on aother interface than the outside interface. If I change the default gateway to the DMZ interface all my DMZ site to site VPN start to work but all my outside site to site VPN stops working.

    I start wondering if this is by design that you can not have an site to site VPN on an other inteface than the outside interface. I try the same thing with an PIX515E with software release 7 and I got the same problem. downgrade it to 6.3 and everything work fine.

    Is there someone that can help me with this?
     
    [email protected], Aug 16, 2007
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.