sipgate: need sample config cisco router sip trunk

Discussion in 'UK VOIP' started by tg, May 16, 2009.

  1. tg

    tg Guest

    cisco 2651xm router running cme and sip trunk and 7940G ip phone.

    I've been hammering away for some time now trying to get my
    cisco-router-sip-trunk to work with sipgate but no joy. The sip trunk
    registers fine with but the dialing in and out doesn't
    work. I get 'Unknown'Number' all the time. I'm now getting a sneaking
    suspicion there might not be compatibility between my gear and sipgate
    but if anyone out there can confim or disagree with this I'd be grateful
    to hear from you, but more importantly if anyone has a sample config for
    a cisco 2600 router that actually works with sipgate I'd be very
    grateful to see it.
    thanks for any help.
    tg, May 16, 2009
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.