Setting up VPN from Windows XP to a Cisco router

Discussion in 'Cisco' started by rengaw03, Apr 18, 2006.

  1. rengaw03

    Merv Guest

    Do you have a Cisco support contract for your Cisco 877 ?
     
    Merv, Apr 25, 2006
    #21
    1. Advertisements

  2. rengaw03

    Merv Guest

    Try upgrading the IOS version to 12.3(14)YT1
     
    Merv, Apr 25, 2006
    #22
    1. Advertisements

  3. rengaw03

    Merv Guest

    Try changing the address pool from 192.168.1.1 to 172.16.1.1


    no ip local pool WINVPN 192.168.16.1 192.168.16.254
    ip local pool WINVPN 172.16.1.1 172.16.1.254
     
    Merv, Apr 25, 2006
    #23
  4. rengaw03

    jimwillsher

    Joined:
    May 8, 2006
    Messages:
    1
    Likes Received:
    0
    Sorry to hijack this thread, but I'm having the same problem on a Cisco 837.

    I can connect successfully to the router using pptp, but I can ping ONLY the router (192.168.1.1), not any of the devices behind the router.

    If I manually execute a "route add 192.168.1.0 MASK 255.255.255.0 <allocated VPN IP address>"

    e.g.
    ROUTE ADD 192.168.1.0 MASK 255.255.255.0 172.16.1.1

    I can then hapily ping (and access) all my devices on the 192.168.1.x range.

    My question is therefore probably the same as the OP of this thread. How can I get the Cisco to automagically add a static route when I connect? I guess its via the "ip route ...." IOS command, but I don't know what else is required.

    Can anyone help? This is driving me nuts!

    Cheers,



    Jim
     
    jimwillsher, May 8, 2006
    #24
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.