Routing between 2 VOIP Router & Wan Router

Discussion in 'Hardware' started by jrendant, Oct 14, 2006.

  1. jrendant


    Oct 14, 2006
    Likes Received:
    I have comcast and a netgear router for all my wired PC's
    Dynamic IP from Comcast (WAN Port)-> (Lan Port)- Subnet (netgear) Default route provided by ISP.

    Connected to one of the ports on the netgear router, I have a Linksys wireless/VOIP router.

    (netgear) -> (Linksys WAN port)-> (Linksys LAN Port) Subnet (Linksys) Default route is

    My server connects to the netgear through a routing switch and provides DHCP to the 172.16.x.x connected lan ( - subnet mask

    The Linksys VOIP router provides DHCP to wireless devices>125 subnet mask

    DNS is HOMEOFFICE.local

    I can lookup machines with NSLOOKUP using computer.homeoffice.local and it does return the correct IP address.

    I cant PING across the subnet. I can't connect to the shared resources in either direction. I can print from the 198 segment to the server on 172 segment.

    I can get to the Internet through the 192->172 default route.

    I need to communicate between subnets, Any Ideas?


    I am stumped and looking for help.
    jrendant, Oct 14, 2006
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.