Router vonage router

Discussion in 'Network Routers' started by Rod Hitchcock, Jul 10, 2008.

  1. Rod Hitchcock

    Rod Hitchcock Guest

    Hi All,
    I've been reading the group for a couple of days now and I haven't seen
    anything on this setup.
    I had 3 computers and a printer on my Ethernet 4 ports. When I got
    Vonage they hooked it to the router in place of the printer, then hooked
    that printer to the Vonage. All computers can get to the internet, but I
    can't see or use the printer on my net. Vonage shows up as -- .
    Sometimes I have other computers connected wirelessly and the NetGear
    wireless isn't fast enough for my application. So I added the Level 1
    WBR-600 for the wireless. Is there a way to see the WBR-6000 From the
    other computers on the net, so I can use my printer and easily turn the
    wireless on and off when I'm not using it?

    From cable modem I have a NetGear WGR 614 router version V2.16RC4_1.0.2
    connected a Motorola Vonage VT2142-VD from the vonage I have another
    router a Level 1 WBR-6000, then to a network printer.
    Rod
     
    Rod Hitchcock, Jul 10, 2008
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Can't file, print share with 2 Router home network-Vonage problem

  2. Vonage Popup

  3. Giving Vonage voice packets priority with Cisco 1720

  4. Can Vonage et al be used FROM foreign countries?

  5. VPN over Vonage Router

  6. Linksys WRT54GS Router with SPI Stateful Packet Inspection and Vonage

  7. Vonage adapter with USR 5461 router?

  8. Locked Vonage broadband router

Loading...