Router to ISDN PC callback problem...

Discussion in 'Cisco' started by SS, Feb 25, 2005.

  1. SS

    SS Guest

    I have problem with callback from router to my PC (ISDN). This is the
    configuration of my Cisco router 1603. With this configuration I can connect
    to router over ISDN link. Router screens my calling number but it doesn't
    hang up and call me back. When I connect router should assign me private
    address drom pool 10.0.0.2 - 10.0.0.5. So, my question is what else do I
    have to put in my configuration for this thing to work. I want to initiate
    call from my PC to router and than router should hang up and call me back.
    Is this possible at all considering use of ISDN BRI connection? And if it is
    what commands should I add to my config? Thanks.

    !
    enable password 7 011A0802541F03072F4D1E5C
    !
    username user password 7 104B0E0E02430101
    ip subnet-zero
    no ip domain-lookup
    isdn switch-type basic-net3
    !
    !
    !
    interface Ethernet0
    description "connection toward private LAN"
    ip address 192.168.0.20 255.255.255.0
    no ip directed-broadcast
    ip nat outside
    !

    interface BRI0
    description "Connection to remote PC"
    no ip address
    no ip directed-broadcast
    ip nat inside
    encapsulation ppp
    dialer callback-secure
    dialer enable-timeout 2
    dialer-group 1
    isdn switch-type basic-net3
    no cdp enable
    ppp authentication chap
    !
    interface Dialer1
    description connected to Dial-inPCs(ISDN)
    ip address 10.0.0.1 255.255.255.0
    no ip directed-broadcast
    ip nat inside
    encapsulation ppp
    no ip split-horizon
    dialer remote-name user
    dialer enable-timeout 5
    dialer caller 2499xxx callback
    dialer pool 1
    dialer-group 1
    peer default ip address pool ADDR
    no cdp enable
    ppp authentication pap
    !
    !
    router rip
    version 2
    network 10.0.0.0
    network 192.168.0.0
    no auto-summary
    !
    ip local pool ADDR 10.0.0.2 10.0.0.5
    ip nat inside source list 1 interface Ethernet0 overload
    ip classless
    ip route 0.0.0.0 0.0.0.0 192.168.0.14
    !
    !
    map-class dialer dial1
    dialer callback-server username
    access-list 1 permit 10.0.0.0 0.0.0.255
    dialer-list 1 protocol ip permit
    !
    line con 0
    exec-timeout 0 0
    password 7 020F0A5D04120A29424F594C
    login
    transport input none
    line vty 0 4
    password 7 08284248060D001F1C0A5C51
    login
    !
    end
     
    SS, Feb 25, 2005
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.