RIP over Frame Relay problem

Discussion in 'Cisco' started by 2000ContourSVT, Dec 7, 2009.

  1. 2000ContourSVT

    2000ContourSVT

    Joined:
    Dec 7, 2009
    Messages:
    2
    Likes Received:
    0
    I'm having a problem getting RIP to work on my network in Packet Tracer. I have an image of the topology, but unfortunately I can't post links or images since I'm new here, so please view my attachment. I've also posted up the packer tracer file as well as the config files of each router.

    The link between R1 and R3 is configured using Frame Relay.
    The link between R1 and R2 is configured using PPP with CHAP.
    The link between R2 and R3 is configured using HDLC encapsulation.

    Getting RIP running over these should be easy I would think, however, I've been trying to get it to work for 2 days now and I have yet to get it working. I'd appreciate it if someone could help me get this working. Thanks in advance.
     

    Attached Files:

    2000ContourSVT, Dec 7, 2009
    #1
    1. Advertisements

  2. 2000ContourSVT

    2000ContourSVT

    Joined:
    Dec 7, 2009
    Messages:
    2
    Likes Received:
    0
    Nevermind, I found the solution.

    For those who come across this thread looking for answers. I switched from RIP V1 to RIP V2, turned off auto-summary, added the network addresses for my PC's to R1 and R3, and now it works.

    I knew there was something simple I was missing.
     
    2000ContourSVT, Dec 7, 2009
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.