Reverse Telnet from aux on primary to con on secondary

Discussion in 'Cisco' started by firewa112003, Feb 25, 2005.

  1. firewa112003

    firewa112003 Guest

    I have several of these implementaions working now, actually about 15.
    But i now have 2 sites that I can't seem to be able to do the reverse
    telnet on. the configurations on all routers are exactley the same
    (except for proper loopback ip's). The routers I am having trouble with
    one is a 1720 with vpn bundle running c1700-k9o3sy7-mz.122-2.XH.bin. I
    use this aux port to the secondary router's con port and running code

    Anyone else ever see issues with RT from a 1720 to a 1721?


    firewa112003, Feb 25, 2005
    1. Advertisements

  2. firewa112003

    Hansang Bae Guest

    Bad cable? Bad port? some default setting you didn't consider?



    "Somehow I imagined this experience would be more rewarding" Calvin
    **************************ROT13 MY ADDRESS*************************
    Due to the volume of email that I receive, I may not not be able to
    reply to emails sent to my account. Please post a followup instead.
    Hansang Bae, Feb 26, 2005
    1. Advertisements

  3. firewa112003

    Philip D'Ath Guest

    Have you tried changed the version of the software on the 1720 to match
    that of the other routers that are all working? For example, have all
    the routers running 12.3(8)T3?
    Philip D'Ath, Feb 26, 2005
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.