resetting just one isakmp

Discussion in 'Cisco' started by Paul, Oct 31, 2005.

  1. Paul

    Paul Guest

    We have our Cisco router hosting VPN to 3 external facilities which use
    Symantec VPM devices - every so often the connection drops . If I reset all
    of the
    VPN on the cisco router all is well but when I do this I don't want to have
    to clear isakmp sa which clears them all - I want to only clear crypto
    isakmp (specific connection) only. I saw in some documentation that if you
    do a show crypto isakmp sa it shows you the connection ID which I could use
    to kill the connection on a ID by ID level. But on my PIX506E when I type in
    show crypto isakmp sa I only get the dst,src,state,pending,created feilds
    and no Conn-id feild. Is this not available on this router ? Any help would
    be appreciated to help me kill only one connection and not all of them.
     
    Paul, Oct 31, 2005
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.