"Repair" function

Discussion in 'Wireless Networks' started by joe925c, Sep 12, 2009.

  1. joe925c

    joe925c Guest

    When I loose my wireless Internet connection, the "repair" function
    immediately corrects the situation.

    Is this operation provided in Windows XP software; wireless adapter driver
    software, etc.?

    Is there any way to issue the "repair" procedure automatically when the
    connection is designated in the PC as being disconnected? Repeat until
    connection is deemed established?
    joe925c, Sep 12, 2009
    1. Advertisements

  2. Hi
    Namh, there is No simple way to do so.
    However you should try to find out what is repaired, and correct the problem
    from the "Root".
    Jack (MS, MVP-Networking).
    Jack [MVP-Networking], Sep 14, 2009
    1. Advertisements

  3. joe925c

    joe925c Guest


    It does appear that the repair function is provided in Windows.

    I would like to "correct the problem at the root" but the event is highly
    random. I have started to keep a journal to see if there is any common thread.

    You mention that I should try to find out what is repaired. When I select
    repair, the only information I see is that it cycles through the disable then
    logs in again. There is no summary except that communication has bee
    joe925c, Sep 15, 2009
  4. Hi
    Something is wrong with one of the Wireless Network components, or and its
    When you run the repair it Repairs the situation and the Network components
    are working OK but when the computer reboots it probably revert to the wrong
    You have to go over all the Network related settings and make sure thta they
    are correctly set.
    This page might help to guide into what to look for,
    Jack (MS, MVP-Networking).
    Jack [MVP-Networking], Sep 15, 2009
  5. joe925c

    ED Guest

    ED, Sep 15, 2009
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.