Remote desktop on two servers at the same LAN

Discussion in 'Cisco' started by Martin, Dec 14, 2006.

  1. Martin

    Martin Guest

    I have one PIX 501 and two windows servers. On the outside on the PIX it
    has an public IP. On the inside it has the IP 192.168.1.1 and this is
    the gateway for my two servers, placed on: 192.168.1.2 & 192.168.1.3.

    I want to be able to access the two servers with remote desktop.
    It works fine for one of them (192.168.1.2).

    I have this config:
    access-list allow_inbound permit tcp host 2xx.xx.42.x interface outside
    eq 3389
    static (inside,outside) tcp interface 3389 192.168.1.2 3389 netmask
    255.255.255.255 0 0

    Typing my public IP I can access 192.168.1.2.

    But, I also want to be able to connect 192.168.1.3 from my public IP.
    I have made this config:
    access-list allow_inbound permit tcp host 2xx.xx.42.x interface outside
    eq 3390
    static (inside,outside) tcp interface 3390 192.168.1.2 3389 netmask
    255.255.255.255 0 0

    Typing <my public ip>:3390 does not work :-(
    I was hoping to access the 192.168.1.3...

    I know remote desktop works on 192.168.1.3... it must have something to
    do with the PIX, but what?

    Best Regards
    Martin
     
    Martin, Dec 14, 2006
    #1
    1. Advertisements

  2. You used the same internal IP destination on both static statements,
    192.168.1.2 in both.
     
    Walter Roberson, Dec 14, 2006
    #2
    1. Advertisements

  3. Martin

    mak Guest

    which version do you have,
    looks like it doesn't support PAT

    M
     
    mak, Dec 14, 2006
    #3
  4. Martin

    Martin Guest

    Hi Walter,

    I made an error typing this question, the second should of course be
    192.168.1.3.

    It does not work :-(
    Are the two lines correct ?

    Regards
    Martin
     
    Martin, Dec 14, 2006
    #4
  5. Martin

    Martin Guest

    This is my version data:

    Cisco PIX Firewall Version 6.3(5)
    Cisco PIX Device Manager Version 3.0(4)

    Compiled on Thu 04-Aug-05 21:40 by morlee

    PIX1 up 2 days 14 hours

    Hardware: PIX-501, 16 MB RAM, CPU Am5x86 133 MHz
    Flash E28F640J3 @ 0x3000000, 8MB
    BIOS Flash E28F640J3 @ 0xfffd8000, 128KB
     
    Martin, Dec 14, 2006
    #5
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.