Regarding AVAYA IP Phone 1608 & Cisco DHCP

Discussion in 'Cisco' started by eng_ahmedas, Nov 14, 2011.

  1. eng_ahmedas

    eng_ahmedas

    Joined:
    May 23, 2009
    Messages:
    4
    Likes Received:
    0
    Dear Friends

    I wish you are fine ..... I have a problem regrading AVAYA IP Phone 1608 .... I configure my Cisco router as DHCP server for 1608 .... The configuration provide the phone with basic IP information .... In my network i have 2 gatekeepers with the primary has IP address 192.168.1.171 & the secondary has IP address 192.168.172 ... I add option 242 to my DHCP configuration and then add the primary and secondary gatekeepers .... The phone can register successfully with primary gatekeeper .... But when the primary gatekeepers is not availabe, The 1608 can't register with secondary gatekeeper and what appears on phone screen "Discovering 192.168.1.171" .... Here is my configuration:

    ip dhcp pool VOIP
    network 192.168.1.0 255.255.255.0
    default-router 192.168.1.243
    option 242 ascii "MCIPADD=192.168.1.171,192.168.1.172,MCPORT=1719,H TTPSRVR=192.168.1.171"


    Does the 1608 support redundant gatekeepers ?????

    Can anyone help ???

    Thanks in advance
     
    eng_ahmedas, Nov 14, 2011
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Cisco switches W/ Avaya IP phones

  2. (avaya vs. cisco) VLAN membership question

  3. Cisco IP Phone H.323 with Avaya IP Office

  4. Avaya Soft Phone on Linux

  5. Avaya SIP Phone ConVersion

  6. Serviced office Avaya phone Asterisk VoIP question

  7. avaya small office and phone manager lite problem

  8. Using an Avaya 4610SW IP phone with Cisco CME 3.3

Loading...