Hey, this is Mike. I'm stumped on some questions I have. The first question I have is , Assume you are connected via serial console to a Cisco 2600 with a default config. You have been assigned the far side of 64.142.0.60/30 as a transport network. List all of the IOS commands needed to statically configure it for internet reachability via FastEthernet0/1. The second question I have is How many IPs are in a Class C subnet? Assuming a gateway is in use, what is the max number of hosts you could have assigned on that IP block? I think its 256 with 2 reserved ips. 254 useable ips? thanks