Question abut the Cisco 2620 router

Discussion in 'Cisco' started by ahhyes, Oct 20, 2009.

  1. ahhyes

    ahhyes

    Joined:
    Oct 20, 2009
    Messages:
    1
    Likes Received:
    0
    Hi Guys,

    I managed to get one of these for pretty cheap. I've now realized that this router has only 1 ethernet port on it (fast ether), is there any compatible NM for this unit that will provide an additional FE port?

    NM-1FE-TX could do the job, but I have been reading that this module is NOT compatible with the 2600 series at all.

    Any thoughts?

    I would like to use this in conjunction with my cable modem, but having only 1 ethernet port is a pain. Now I wish I had bought a 2621 (which has 2 FE's).
     
    ahhyes, Oct 20, 2009
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. SNMP on a 2620 router

  2. Can a Cisco 831 establish a VPN tunnel via a Cisco 2620?

  3. quick question regarding 2620 cisco routers and the processor revision...

  4. Troubles with Cisco 2620 Router?

  5. configuring cisco 2620 for pppoe to DSL router

  6. Boot ROM chip required to upgrade both a Cisco 2610 and a Cisco 2620 router to support 32 megs+ flas

  7. Cisco 2620 Router IOS Upgrade

  8. ask a question abut cable

Loading...