QOS config IOS 12.2 on 2600 router using 2Meg Frame Relay link to ISP

Discussion in 'Cisco' started by Kieron Joy, Aug 13, 2005.

  1. Kieron Joy

    Kieron Joy Guest

    Installing QOS on WLAN feed to 2Meg frame Relay link to ISP.
    Using proxim 5.8Ghz radios on backhaul with Cisco 350 AP's serving local
    clients using linksys WET11 radios.
    I now need QOS installed. 30 clients using best effort is now causing severe
    I also have 2Meg Adsl as backup.

    Config help will be gratefully received.

    Kieron Joy, Aug 13, 2005
    1. Advertisements

  2. Hi Kieron,

    You may wish to investigate the online Cisco Wireless TAC Case /
    Knowledge Base:

    Hope this helps.

    Additionally, will check with Reggie Grant to see that he answered your
    request on August 13th.

    Brad Reese
    Free Cisco Security Upgrades:

    BradReese.Com Cisco Repair Service Experts
    1293 Hendersonville Road, Suite 17
    Asheville, North Carolina USA 28803
    U.S./Canada Toll Free: 877-549-2680
    International: 828-277-7272
    United Kingdom: 44-20-70784294
    www.BradReese.Com, Aug 17, 2005
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.