problems with modem relay over IP - Zyxel Omni 56k Mini modem

Discussion in 'VOIP' started by Sani Rus, Nov 8, 2007.

  1. Sani Rus

    Sani Rus Guest

    Hello group,

    Zyxel Omni 56k Mini modem give us big problems when we want to establish
    modem connection over the IP network beetwen two modems of this type. We set
    all relevant VoIP parameters accordingly (G.711, jitter, echo canceller,
    VAD) but still we have problems in establishing connections between two
    modems. With other modem types everything works OK.

    Are you aware of any VoIP related problems with this modem type e.g. bad
    resiliency to additional delay? Are you aware of any modem setting for this
    modem type which might helps when establishing connections over the IP
    network?
    Regards,

    Sani
     
    Sani Rus, Nov 8, 2007
    #1

    1. Advertisements

  2. Sani Rus

    liuzhaoyongxx Guest

    Hi

    as I know, there are only t.38 protocol for fax. For modem, it can't
    work on voip.

    Leon

    Email:
     
    liuzhaoyongxx, Nov 12, 2007
    #2

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. WIC-2A/S and 56K Frame Relay

  2. Cisco ISDN BRI S/T and Zyxel omni.net LCD+M

  3. Modem Over IP: Problems in connecting two modems using a Modem Passthru type of connection

  4. Recommendation for Speedtouch 716WL over Zyxel 2602HW

  5. Dhcp Relay Agent And Acl On Sw 3750, DHCP Relay Agent and ACL on Sw 3750

  6. PCI modem driver Smart Link 56K Voice Modem

  7. Zyxel Zyxel P-2602H-D1A phone book limitations

  8. VOIP over VPN over TCP over WAP over 3G

Loading...