problem with webaccess into cisco 1812

Discussion in 'Hardware' started by thomasek, Sep 26, 2008.

  1. thomasek

    thomasek

    Joined:
    Sep 26, 2008
    Messages:
    1
    Likes Received:
    0
    Hi, I have problem with cisco 1812. When I configured it, I set the port for VPN to 80, so that is the same as standard WWW port. Because of that I lost the Access to the router over WWW (SDM) and I need it.
    It is possible to change the www port via Console and Hyperterminal or erase the vpn setting on the router.
    Thank you very much for any responses
     
    thomasek, Sep 26, 2008
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Cisco 1812

  2. Cisco 1812 (SDM and WebVPN on the same IP)

  3. Cisco 1812 site to site vpn on checkpoint firewall

  4. vlan1 problem on cisco 1812

  5. CISCO 1812

  6. Cisco 1812 subnet to subnet NAT

  7. IPSec VPN Cisco 1812 and ASA 5510

  8. Cisco IOS question 12.4(15)T7 on 1812 Router

Loading...