Problem with Cisco 1750

Discussion in 'Cisco' started by Sairam, Jan 19, 2005.

  1. Sairam

    Sairam Guest

    I'm having problems in bringing up my Cisco 1750. I've inserted a FX
    interface card onto the VIC slot0 on the C1750. The C1750 boots u
    normally without any problems. But i donot get dialtong on my phon
    connected to the FXS interface and i'm not able to make any calls
    I've giving the information about the configuration and versio
    below. When i give the 'show voice dsp' command, i get a Seg
    exception and the Cisco reboots. Please help me out with a solutio
    for this problem

    ****show voice dsp**

    show voice ds

    *** System received a SegV exception **
    signal= 0xb, code= 0x1200, context= 0x80ae5b2
    PC = 0x80750e54, Vector = 0x1200, SP = 0x80d7299

    ****Show Config ***
    show versio
    Cisco Internetwork Operating System Software
    IOS (tm) C1700 Software (C1700-SV3Y-M), Version 12.0(5)XQ, EARL
    TAC:Home:SW:IOS:Specials for inf
    Copyright (c) 1986-1999 by cisco Systems, Inc
    Compiled Mon 09-Aug-99 14:52 by rnapie
    Image text-base: 0x80008088, data-base: 0x8078545

    ROM: System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1
    ROM: C1700 Software (C1700-SV3Y-M), Version 12.0(5)XQ, EARL

    Cisco1750 uptime is 32 minute
    System returned to ROM by power-o
    System image file is "flash:aaa0826.bin

    cisco 1750 (MPC860) processor (revision 0x601) with 20890K/3686K byte
    of memory
    Processor board ID JAD04110CV6 (2966734884), with hardware revisio
    M860 processor: part number 0, mask 3
    Bridging software
    X.25 software, Version 3.0.0
    1 FastEthernet/IEEE 802.3 interface(s
    --More--  1 Serial(sync/async) networ
    32K bytes of non-volatile configuration memory
    8192K bytes of processor board System flash (Read/Write

    Configuration register is 0x210


    **** Show Config ***

    Using 853 out of 29688 byte

    version 12.
    service timestamps debug uptim
    service timestamps log uptim
    no service password-encryptio

    hostname Cisco175

    enable secret 5 $1$KCBs$dBK5MZCGpuBbrMq.kuyxZ
    enable password cisco175

    memory-size iomem 1
    ip subnet-zer
    no ip routin

    --More--  dial-peer voice 101 voi
    destination-pattern 10
    codec g711alaw bytes 8

    dial-peer voice 201 pot

    process-max-time 20

    interface Serial
    no ip addres
    no ip directed-broadcas
    no ip route-cach
    no ip mroute-cach
    no cdp enabl

    interface FastEthernet
    ip address 255.255.255.
    no ip directed-broadcas
    no ip route-cach
    no ip mroute-cach
    --More--   full-duple
    no cdp enabl

    ip classles
    no ip http serve

    no cdp ru

    line con
    transport input non
    line aux
    line vty 0
    password 175

    voice class codec


    Sairam, Jan 19, 2005
    1. Advertisements

  2. Sairam

    BradReeseCom Guest

    Hi Sairam,

    FARNOOSH BROCK at Cisco said a while back,

    "As much as we recommend not using 12.1(3)T for voip (H323 or SIP) for
    the following field notice:

    The 1750 platform in particular should not be affected.

    DSP timeout however has been a continuous problem in 12.1T series IOS.

    If you can please upgrade to latest 12.2 mainline, and reset the box
    (which you will do in process of upgrade) and examine the issue again,
    most likely the problem will be solved."


    Brad Reese
    BradReese.Com Cisco Repair Worldwide
    United Kingdom: 44-20-70784294
    U.S. Toll Free: 877-549-2680
    International: 828-277-7272
    Fax: 775-254-3558
    BradReeseCom, Jan 19, 2005
    1. Advertisements

  3. Sairam

    Anthony Guest

    Hi Sairam,

    If you want to send me the crashinfo from the bootflash I will try and
    help you out. In the email include both the show tech and crash file.
    To find the crashinfo do the following:

    - dir flash:

    HQ-gw1751-01#dir flash:
    Directory of flash:/

    1 -rw- 11720880 <no date>
    5 -rw- 600 <no date> vlan.dat
    6 -rw- 320634 <no date>


    - more flash:<file-name>
    replace the <file-name> with your crashinfo name found in the dir

    Anthony, Jan 19, 2005
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.