PPPoE connection timeout

Discussion in 'Cisco' started by HoWi, Nov 5, 2003.

  1. HoWi

    HoWi Guest

    Hello,

    we use a PIX 515E-RDMZ to protect our network. The outside interface
    is directly connected to the providers DSL-modem (t-online). We have
    no problem to establish the pppoe connection, our problem is, that the
    connection never goes down. We have no flat rate, so we are depend on
    an accurate connection management. How can I say the PIX, that it
    shell disconnect after an idle-time of e.g. 5 minutes. Is this
    possible or is it better to implemet this function with a external
    DSL-Router?

    Thank you for your help!

    Holger
     
    HoWi, Nov 5, 2003
    #1
    1. Advertisements

  2. HoWi

    Jose Guest

    Hi,

    Would suggest configure the interface dialer, dialer idle-timeout and
    also setup the ntp would should cause additional traffic and hopefully
    that should sort it out.
     
    Jose, Nov 5, 2003
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.